Ethernet cable FinMark UTP CAT5e

 Application: for fixed cabling inside of buildings, plants, premises and equipment. Cable shell is made from polyvinylchloride elastron (PVC) of grey color. Outer cable diameter is 5 mm.

The main electric properties:

• Impedance (100±15) Ohm
• Direct current resistance is 94 Ohm/km
• Maximum, minimum and average operation temperatures;
• Propagation velocity is 0,68×s

Mechanical properties:

• Cable consists of 4 pairs of conductors weaved between each other.
• Conductor material: copper wire of 0.51 mm in dia (24 AWG)
• Conductor insulation is polyethylene, conductor diameter in insulation is 0.9 mm
• Temperature range:

• installation -10 °C … +60 °C;

• operating -30 °C … +60 °C.

• Minimal bending radius:

• During erection (dynamic) ≥ 8 x cable diameters.
• After erection (constant) ≥ 4 x cable diameters.

• Tensile load ≤ 85 Н

• In cable there is applied conventional color identification of conductors:
  pair 1: white-blue ⁄ blue
  pair 2: white-orange ⁄ orange
  pair 3: white-green ⁄ green
  pair 4: white-brown ⁄ brown
  
  Packing: Cable is packed into carton boxes as per Reelex principle, allowing pull cable end out freely except for cable with steel carrying wire. Due to strong rigidity self-carrying cable is wound like coil and packed in carton box.

In this article one can introduce oneself with recommendations referring selection of qualitative cable.