Automatic Arc Fusion Splicer Inno Instrument IFS-10

Rating:

Description:

The Korean Company Inno Instrument presented its new splicing machine for operations with different types of fiber (MM, SM, DS, NRZ, G.657 (A, B)) - model IFS-10, which came in the stead of model IFS-9.

This compact, lightweight and reliable unit retains all the advantages of its predecessor, and even exceeded it with some parameters.

Loss statistics at a splicing joint for splicing machine IFS-10:
0.00 dB: 10% splices
0.01 dB: 70% splices
0.02 dB: 20% splices

The data are true for SM fibers of the same manufacturer, spliced under normal conditions.

Main advantages of the splicing machine:

Weight only 2.2 kg (without accumulator battery);
Adapted for operation under severe weather conditions;
Simple and user-friendly interface;
High capacity battery: 350 splices without recharging;
Quickly optimized fiber;
High-precision splicing;
USB port for updating the device software;
Swivel screen for operation from the rear of the splicing machine.

Specification of automatic splicing machine Inno Instrument IFS-10:

Fiber alignment method	PAS
Types of spliced fibers	Single-mode SM(ITU-T G.652), Multimode MM(ITU-T G.651), Dispersion region shifted DS(ITU-T G.653), Non-zero dispersion shifted NZDS(ITU-T G.655) Hyposensitive to bends (ITU-T G.657)
Spliced fiber diameter	From 80 µm to 150 µm
Coating diameter of the spliced fiber	From 100 µm to 1000 µm
Length of strapped fibers	8 mm (if diameter of the spliced fiber is not more than 0.25mm); 16 mm (if diameter of the spliced fiber is 250 up to 1000 µm)
Real average loss at a splice joint	0.02 dB for SM 0.01 dB for ММ 0.04 dB for DS 0.04 dB for NZDS
Standard splicing time	9 sec. for SM fiber
Heat shrink time	30 s
Reflection factor from the splicing joint	Not less than 60 dB
Splicing program	10 user-adjustable splicing programs and 100 pre-set splicing programs
Saving of splicing results and parameters	Up to 2000 splicing results
Testing of splice point for mechanical strength	Tensile force 200 g
Display	Color 5.6”
Front-end interfaces	RS232 for data transfer on PC
Power supply	AC mains 100–240 V
Number of splicing cycles with heat shrinkage in case of battery supply	About 350 cycles
Operating conditions	From 0 to 5000 m above sea level; Relative air humidity from 0 to 95%; Temperature from -10 to +50°С
Wind screen	Maximum permissible wind velocity 15 m/s
Dimensions	168 х 148 х 160
Weight	2.2 kg

Comments

Please log in to write comments.